1. Plug in the Projector Cord into the corresponding cord from the Computer's Cart
You will see a large cord made of 3 smaller cords, you just need to plug and screw in the correct one into the back of the instructors PC
2. Log into the Computer
3. Open Mozilla Firefox
Click on Adobe Connect tab, share screen located in the middle of the window, audio by clicking on the microphone tab on the top of the window, and web cam located on the left of the window.
Go to file and click start meeting
Minimize window
4. Open Panopto
located on the desktop (green)
Name recording correctly
Click on record
Minimize window
5. Turn on projector using control panel on desk
If the projector is only showing a blue screen go to Control Panel > Display > Choose the third icon from the list on the right >Detect Device and your done
7. Take out the microphone from the desk and make sure it is working. If not, change the batteries.
8. Wait for professor to show up to see if he needs anything else from you.
During Class:
9. Back in the lab open Panopto and Adobe Connect, both are tabs in Mozilla Firefox
Locate correct videos and make sure the Panopto one is being recorded and you can hear and see the Adobe Connect recording
Keep watching Adobe Connect to make sure no problems arise
After Class:
Go back to the class room
11. Open Panopto
Click on stop recording
Click ok to save
Minimize window
12. Open Adobe Connect
Click on file > end recording
Close the window
13. Email the power point file used that day to yourself
In Blackboard, go to your class page > notes > build content > browse computer > firma > your class > that days note
16. Mark class as complete on whiteboard
IMG_0177.jpg
Note: You can double check that everything is posted correctly and then mark it as complete on the whiteboard :) Now that you've finished, you can find some more work to do!
Before Class:
Arrive 10 minutes before the start of class
1. Plug in the Projector Cord into the corresponding cord from the Computer's Cart
2. Log into the Computer
3. Open Mozilla Firefox
4. Open Panopto
5. Turn on projector using control panel on desk
7. Take out the microphone from the desk and make sure it is working. If not, change the batteries.
8. Wait for professor to show up to see if he needs anything else from you.
During Class:
9. Back in the lab open Panopto and Adobe Connect, both are tabs in Mozilla Firefox
After Class:
Go back to the class room
11. Open Panopto
12. Open Adobe Connect
13. Email the power point file used that day to yourself
Back in the lab:
14. Open Panopto
15. Open Adobe Connect
15. Open you email and download powerpoint
16. Mark class as complete on whiteboard
Note: You can double check that everything is posted correctly and then mark it as complete on the whiteboard :) Now that you've finished, you can find some more work to do!